Four Roller High Tension Electrostatic Separator for Zircon Ore Rutile Tin Heavy Mineral Sand

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: 220*1200
• Type: Scrap Metal Shredder
• Automation: Automatic
• Certification: CE
• Drum: 220*1200mm
• Electrostatic: 2*45
• Drum Size: 220*1200mm
• Feeding Size: 0-2mm
• Capacity: 250-450kg/Hour
• Feeder Heater: 7kw
• Transport Package: by FCL or LCL
• Specification: Standard
• Trademark: Hengchang Electrostatic Separator
• Origin: Jiangxi Province China
• HS Code: 8474100000
• Production Capacity: 20sets/Month
• Package Size: 185.00cm * 136.00cm * 175.00cm
• Package Gross Weight: 2000.000kg

Product Description

Four Roller High Tension Electrostatic Separator For Zircon Ore Rutile Tin Heavy Mineral Sand

Hengchang high tension Electrostatic Separator uses 50HZ, 380V AC.  To keep the machine working safety and stability, the installation should meet the following requirements.

Product Description

φ120(φ220,φ165)×1500 double Roller Electrostatic Separator Equipment is one of the major equipment in Electrostatic Separation Process mineral separation. It is widely used in sorting titanium, zirconium, rutile, monazite, iron, tungsten, tantalum, niobium, tin and other precious minerals. It can separate material which's particle size is from 0.1 to 2 mm and surface temperature is less than 1% of itself. It often works well with the single-disc magnetic separator and permanent magnetic sorting machine in the process of sorting ilmenite, zircon ore and other minerals.

Working Principle

Electrical Separation is to electrify wire electrodes with very small diameter with high-voltage direct current to produce corona electric field in the space between corona electrode and grounding electrode. The entire space close to the grounding electrode carries negative charge (positive grounding) at the time and the mineral aggregates have the same chance to obtain electrics while passing through the corona electric field. However, due to different conductivity of minerals, they receive different electricity in the electric field and carry away different electric charges so that ore sands fall along different tracks in the electric field. In this way, good separation conditions are created for minerals with good, medium and no conductivity.

ARC Trigger Performs Separation under the electric intensity and gravity force based on the difference of minerals in their conductivity and the variation of electrostatic force applied on these minerals when the pass through the electric field. It is suitable to separation of conductive mineral and non-conductive mineral,thus to obtain high-grade conductive concentrates and non-conductive concentrates,e.g. rutile ore and zircon ore. It may be used in combination with single-disc separator,double-disc separator,permanent magnetic separator and electromagnetic separator.This machine is equipped with 0-45000 V high-voltage generator,so that it can also be used for separating the high-phosphorus ore or rutile ore that is difficult to separate.

Product Parameters

Model	DXJφ220x1500	DXJφ270x1500	DXJφ320x1500	DXJφ220x2000
Voltage	60000	60000	60000	60000
Magnetic roller number	2 roller. 3 rollers , 4 rollers ,6 rollers optional
Feeding size	20 mesh-280 mesh
Capacity	800-2000 kg/h
Rotating motor	each roller with 1.1 kw motor
Material heater	2 rollers, 3 rollers high temperature 12 kw,low temperature 4 kw 4 rollers,6 rollers  high temperature 22 kw,low temperature 8 kw
Mineral divide drum heater	1 kw
direct current high tension generator	60 kv/50 mA
Power supply	Three phase  four wire
Electric control cabinet size	1200x600x1250 mm
Power consumption	2 rollers 7.5 kw,3 rollers 9 kw, 4 rollers 16.5 kw,6 rollers 19 kw
Approx weight	2 rollers 1500 kg, 3 rollers 2500 kg, 4 rollers 2800 kg,6 rollers 3400 kg

Detailed Photos

 

Installation Instructions

1.What is your machine used for ?
Our Electrostatic separator is widely used in sorting titanium, zirconium, rutile, monazite, iron, tungsten, tantalum, niobium, tin and other precious minerals.

2.Are you factory or trade company?
Yes,we are the Professional manufacturer from 1985.So we could give you original factory price than those trade companies.

3.Can I operate it well, if I have no experience?
Do not worry! Our machines is designed to use easily.You are welcome to visit our company to be trained here,And we could arrange the engineer to go to your country/company to train your workers directly as your requested and the relative travel cost will be on your account.

4.How about your Service ?
All of our machines have one year warranty and Wholelife Technology support to make sure your machine work well.

5.How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.What about the payment method?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Warmly welcome to contact below seller to get good quotation and professional service.