Ore Mineral Separator Gold Shaking Table Lab Mining Equipment 2M Long Shaker Table For Gold Mining
1. Production Introduction For Shaking Table
The shaking table is widely used for sorting tungsten ore. Its main function is sorting the rough and concentrated mixture after tungsten ores gravity separating. (Such as rough concentrate sorted by jig and shaking table). Process particle size is ranging from 2 mm to 0.074 mm. The separating effect is especially for tungsten ore with a variety of sulfide minerals. It has the following advantages compared with the gold table: it is easy to observe changes of slurry on the shaking table; easy to operate; it has many different specifications for choosing.
The working principle of the
Shaking Table is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.
model: 6S-4.5m long
deck size: 4.5m long, 1.85 wide
power: 1.1KW
Motor: 380v,50Hz
1. Head of
Shaking Table: This is an eccentric connecting-rod type mechanism. The motor drives the eccentric shafts to rotate and the connecting rod to move up and down. When the connecting rod pushes down the toggle plate compression spring, the pull rod drives the table surface to move in the direction of the table head. When the connecting rod pushes it upward, the spring tension drives the table surface to move in the opposite direction. When they are linked, the rotating motion of the eccentric shaft is changed into the horizontal alternating differential motion of the table surface.
2.
Shaking Table surface: It is mainly composed of a vibrating roof, steel skeleton, glass fiber reinforced plastics, and wear-proof surface, feed water tank, feed chute, and drawbar. The table surface adopts a steel skeleton FRP composite structure. That is, glass fiber reinforced plastics are pasted on steel skeleton to form a solid glass fiber reinforced plastic surface. It's above uses abrasion-proof materials to make surface and riffle (notch groove).
3. Bearing and Adjusting Gradient Mechanism:
Shaking Table The bearing and adjusting gradient mechanism is mainly composed of shaking the support plate, adjusting the seat board, and saddle seat, and adjusting the screw rod. The shaking support plate enables the table surface to make arc forward and backward alternating movements on the vertical plane. The shaking support plate and shaking box are fixed on the adjusting seat board with gripping channel steel. When the hand wheel regulating screw rod is used to get the adjusting seat board to rotate on the saddle seat, the Transverse gradient of the table surface can be adjusted.
Technical Parameter Shaking Table
| Name |
Coarse sand surface of the table |
Fine sand surface of the table |
Ore slime surface of the table |
| Table surface |
Length (mm) |
4450 |
4450 |
4450 |
| Dimension |
Transmission end width (mm) |
1855 |
1855 |
1855 |
| |
crude ore width (mm) |
1546 |
1546 |
1546 |
| Max. feeding size (mm) |
2 |
0.5 |
0.15 |
| Feed amount (t/h) |
30-60 |
10-20 |
15-25 |
| Feed density (%) |
25-30 |
20-25 |
15-25 |
| Capacity (t/h) |
0.6-2.5 |
0.6-2.5 |
0.6-2.5 |
| Stroke (mm) |
16-22 |
11-16 |
8-17 |
| Frequency ( f) |
45-48 |
48-53 |
50-57 |
| Water quantity added(t/h) |
80-150 |
30-60 |
10-17 |
| Horizontal obliquity (°) |
2°30′-4°30′ |
1°30′-3°30′ |
1°-2° |
| Longitudinal obliquity (°) |
1.4 |
0.92 |
-- |
| Dressing Area (m2) |
7.6 |
7.6 |
7.6 |
| Cross-section shape of the table surface |
Rectangular |
Sawtooth |
triangle |
| Motor Power (kW) |
1.1 |
1.1 |
1.1 |
| Transmission Mechanism |
Eccentric linkage |
3 different types of base support Shaking tables with quotations have shown below:
4. Shaking table structure:
5. Package and Delivery Shaking tables
6. Related Products
Mobile Jaw Crusher Mini Gold Concentrator Mini Ball Mill
7. About our factory:
Jiangxi Hengchang Mining Machinery Manufacturing Co., Ltd. is located on No.3 Chuangye Road. Guzhang Industrial Park. Shicheng County. Ganzhou City. Jiangxi Province. China. Our company is engaged in the mineral processing equipment research, development, design, and production for many years history has accumulated rich experience in design and production. Enterprise in mineral processing equipment industry has had a positive effect, set up a good reputation. And mainly the manufacture of the products like as shaking table. Flotation equipment. Crushing equipment. Magnetic separator. Screening equipment. Classifying equipment. Agitation tank, Feeding equipment. Gravity separation equipment. Wet separation equipment. Spiral chute. Saw-tooth wave jig and Diaphragm Jig. Grinding equipment. Ball mill. Slurry pump. Centrifugal pump, Conveying equipment.
We manufacture various types of mineral processing machinery and equipment according to our customers' requirements. Our products are widely used for sorting gold, silver, copper, iron, tungsten, and lead. zinc. tin. molybdenum, nickel, tantalum, niobium, manganese ore, coal, monazite, rutile, diamonds, other precious metals, and precious metals mine, and for the flotation colored black metal, precious metals, and other minerals. And we have export qualifications, our products sell well all over the world for several years, especially exported to Brazil. India. Indonesia.South Africa. Somalia, Philippines. Malaysia. Sudan, Nigeria. Iran, Russia, Ghana. Kazakhstan Kyrgyzstan.Cambodia, Vietnam, Korea, Mongolia, and other countries.
8. FAQ
Q1: Are you a factory or trade company?
A: Factory. We are located in Guzhang Industrial Park, Shicheng City, Ganzhou City, Jiangxi Province, China. Welcome you to visit us anytime.
Q2: Can I operate it well? u know I have no experience
A: For the big processing plant, the clients always ask us to send our engineer to guide and train them to use and maintain. and for the single machines, they are easy to be operated, don't worry.
Q3: Can you send me the video to show how the machine works?
A: Sure. We have shot videos for each machine. u can click here to contact me
Q4: What should I take care of when using the machine?
A: Please check the machine regularly and Keep the machine away from thinner and other chemical liquid.
Q5: How about your Service?
A: All of our machines have one year warranty and Whole life Technology support to make sure your machine works well.
Q6: How about the lead time?
A: For some small machines, the lead time is 7-10 days. The big machines will take around 25 days.
Q7: What about the payment method?
A: We suggest 100% TT in advance if the sum is less than 5,000.00 USD, it will save time and bank fees. If the sum is larger than 5,000.00 USD, we will do 30% (or 50%) in advance, the balance should be paid before delivery.
){kind=link}