Canada Alluvial Gold Extractor Equipment Falcon Centrifugal Concentrator Gold Tailings Machine
1. Gold Centrifugal Concentrator STBL 30 60 80 Pictures
Hengchang Gold Centrifugal Concentrator is a kind of gold gravity equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.
Five models are available. Application shows that the recovery can be as high as 90%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0. 074mm, the recovery for the natural gold is expected up to 98%, For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.
2. Gold Centrifugal Concentrator Structure:
3. Gold Centrifugal Concentrator Operation Steps:
Before starting the preparation and check:
1. According to the instructions of motor required for the preparation and check before use.
2. Check the equipment whether the anchor is stable.
3. Check the state of V-belt tension and adjust appropriately (factory test machine has made adjustments)
4. Check the equipment without interference of moving parts, manual turning checks.
5. Check the discharge port (10) is closed.
(1)Start-Up of Bowl Concnetrator
After the above five ready to check , turn the power to start the motor, check motor rotation direction and equipment requirements are the same, whether the interference of moving parts, and then turn on the power, make the equipment into normal operation.
(2) Equipment work note for Bowl Concnetrator
1 monitor the stability and current by use of conventional motor.
2 watch every moving parts without exception condition,.
3 pay attention to slurry ratio, try to adjust it in time.
4 intervals for a period of time, open the peephole on the cover, observation of inner sleeve
(3)Stop of Bowl Concnetrator
The equipment need clean up concentrates per normal work shift. Before stop, first stop feed mine, then stop the equipment, wait for equipment is stationary, unscrew the drain plug concentrate outlet , the ore concentrate into the ore tank (prepared in advance) can be. Cleaning concentrate time to 15 to 20 minutes. Then, tighten drain plug, the next cycle of operation.
If meet special condition, need to temporary shutdown, must first stop to feed mine, then stop backwash water, and then go down.But the downtime should not be too long, too long to prevent resolve within the set of grid sand compaction. (if required downtime long, you need to clean the concentrate first, hen shutdown.) In addition, when you open again after temporary shutdown, need feed slurry first, and then give backwash water, to void the loss of gold particles
4. Gold Centrifugal Concentrator Specification:
|
Model |
STL-20 |
STL-30 |
STL-60 |
STL-80 |
STL-100 |
|
Capacity (t/h) |
0.2-0.6 |
2-3 |
10-20 |
35-45 |
60-120 |
|
Feeding size (mm) |
0-3 |
0-4 |
0-6 |
0-6 |
0-6 |
|
Feeding density (%) |
0-50% |
0-50% |
0-50% |
0-50% |
0-50% |
|
Backwash water (t/h) |
1.5-2 |
4-6 |
10-15 |
17-25 |
40-60 |
|
Output(kg/time) |
2-3 |
10-20 |
30-40 |
60-70 |
70-80 |
|
Motor power (kw) |
0.75 |
1.5 |
5.5 |
11 |
18.5 |
|
Revolution ® |
800 |
600 |
460 |
400 |
360 |
|
Pressure water (Mpa) |
0.04 |
0.12 |
0.25 |
0.35 |
0.4 |
|
Dimension (mm) |
790x785x790 |
1180x1140x1250 |
1970x1670x1750 |
2300x1800x2200 |
2500x2000x2400 |
|
Weight (kg) |
145 |
400 |
1300 |
2000 |
2500 |
5. Successful Case for our Gold Centrifugal Concentrator :
For 5 TPH Rock Gold Processing Plant
50 tph alluvial gold wash plant
6. Hot Selling Machines In our factory :
About Jiangxi Hengchang Factory
----------------------------------------------
Jiangxi Hengchang Mining Machinery Manufacturing Co., Ltd. is located in No.3 Chuangye Road. Guzhang In dustrial Park. Shicheng County. Ganzhou City. Jiangxi Province. China.Our company is engaged in the mineral processing equipment research, development, design and production for many years history, has accumulated rich experience in design and production. Enterprise in mineral processing equipment industry has had a positive effect, set up the good reputation. And mainly the manufacture of the products like as Shaking table. Flotation equipment. Crushing equipment. Magnetic separator. Screening equipment. Classifying equipment. Agitation tank, Feeding equipment. Gravity separation equipment. Wet separation equipment. Spiral chute. Saw-tooth wave jig and Diaphragm Jig. Grinding equipment. Ball mill. Slurry pump. Centrifugal pump, Conveying equipment.
We manufacture various types of mineral processing machinery and equipment according to our customers' requirements. Our products are widely used for sorting gold, silver, copper, iron, tungsten,lead. zinc. tin. molybdenum, nickel, tantalum, niobium, manganese ore, coal, monazite, rutile,diamonds, other precious metals and precious metals mine, and for the flotation colored, black metal,precious metals and other minerals. And we have export qualifications, our products sell well all over the world for several years, especially exported to Brazil. India. Indonesia.South Africa. Somalia, Philippines. Malaysia. Sudan, Nigeria. Iran, Russia, Ghana. Kazakhstan Kyrgyzstan.Cambodia,Vietnam,Korea,Mongolia and other countries.
Our service:
1.Pre-sale services:
(1)Select equipment model;
(2) Design and manufactLire products according to clients' special requirement;
(3)Train technical personnel for dients.
2.Services during the sale:
(1) Pre-check and accept products ahead of delivery;
(2)help clients to draft solving plans.
3. After-sale services:
(1) Assist dients to prepare for the first construction scheme;
(2)Install and debug the equipment;
(3) Train the first-line operators on site;
FAQ
Q: 1.What is your machine used for ?
A: This machine is used for crushing the materials such as Gold,Copper,Mineral etc.
Q: 2.Are you factory or trade company?
A: Yes dear,we are the Professional manufacturer from 1985.So we could give you original factory price than those trade companies. We're also warmly welcome your Visiting our factory if you are in China.
Q: 3.Can I operate it well, if I have no experience?
A: Do not worry! Our machines is designed to use easily.You are welcome to visit our company to be trained here,And we could arrange the engineer to go to your country/company to train your workers directly as your requested and the relative travel cost will be on your account.
Q: 4.Can you send me the video to show how the machine works?
A: Surely.we have made video of every machine,so if you need we can send for you to checking in clearly.
Q: 5. What should I take care when using the machine?
A: Please using the machine in regular and Keeping the machine away from thinner and other chemical liquid.
Q: 6.How about your Service ?
A: All of our machines have one year warranty and Whole life Technology support to make sure your machine work well.
Q: 7.How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: 8.What about the payment method?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.
){kind=link}
){kind=link}