Peru Stlb 30 / 60 Knelson Centrifugal Machine Centrifugal Concentrator Gold

• Customization: Available
• Type: Gravity Separator
• Voltage: 220V/380V/440V
• Model NO.: STLB30
• Weight: 400kg
• Material: Manganese Steel and Stainless Steel
• Material Feature: Wear-Resistant, Anti-Corrosion
• Certification: ISO9001:2008, ISO9001:2000, CE, SGS
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Can Be Customized According to Customer Requiremen
• Customized: Can Be Customized According to Customer Requiremen
• Condition: New
• After-sales Service: 18 Month
• Feeding Density: 0-50%
• Feeding Size: 0-5mm
• Capacity: 2-3tph
• Dimension: 1180*1140*1250mm
• Power: 1.5kw
• Transport Package: by FCL or LCL
• Specification: Standard
• Trademark: Hengchang Gold Centrifugal Concentrator
• Origin: Jiangxi Province China
• HS Code: 8474100000
• Production Capacity: 1000 Sets Per Year
• Package Size: 180.00cm * 150.00cm * 150.00cm
• Package Gross Weight: 400.000kg

Product Description

Peru Stlb 30 / 60 Knelson Centrifugal Machine Centrifugal Concentrator Gold

Hengchang Gold Centrifugal Concentrator is a kind of gold gravity equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.

Product Description

Five models are available. Application shows that the recovery can be as high as 90%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0. 074mm, the recovery for the natural gold is expected up to 98%, For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.

Installation Instructions

Before starting the preparation and check:

1. According to the instructions of motor required for the preparation and check before use.
2. Check the equipment whether the anchor is stable.
3. Check the state of V-belt tension and adjust appropriately (factory test machine has made adjustments)
4. Check the equipment without interference of moving parts, manual turning checks.
5. Check the discharge port (10) is closed. After the above five ready to check , turn the power to start the motor, check motor rotation direction and equipment requirements are the same, whether the interference of moving parts, and then turn on the power, make the equipment into normal operation.

Equipment work note for Centrifugal Concentrator

1 monitor the stability and current by use of conventional motor.
2 watch every moving parts without exception condition,.
3 pay attention to slurry ratio, try to adjust it in time.
4 intervals for a period of time, open the peephole on the cover, observation of inner sleeve                                                   

Stop of Gold Centrifugal Concentrator

The equipment need clean up concentrates per normal work shift. Before stop, first stop feed mine, then stop the equipment, wait for equipment is stationary, unscrew the drain plug concentrate outlet , the ore concentrate into the ore tank (prepared in advance) can be. Cleaning concentrate time to 15 to 20 minutes. Then, tighten drain plug, the next cycle of operation.

If meet special condition, need to temporary shutdown, must first stop to feed mine, then stop backwash water, and then go down.But the downtime should not be too long, too long to prevent resolve within the set of grid sand compaction. (if required downtime long, you need to clean the concentrate first, hen shutdown.) In addition, when you open again after temporary shutdown, need feed slurry first, and then give backwash water, to void the loss of gold particles.

Product Parameters

Model	STL-30	STL-60	STL-80	STL-100
Capacity (t/h)	2-3	10-20	35-45	60-120
Feeding size (mm)	0-4	0-6	0-6	0-6
Feeding density (%)	0-50%	0-50%	0-50%	0-50%
Backwash water (t/h)	4-6	10-15	17-25	40-60
Output(kg/time)	10-20	30-40	60-70	70-80
Motor power(kw)	1.5	5.5	11	18.5
Revolution ®	600	460	400	360
Pressure water(Mpa)	0.12	0.25	0.35	0.4
Dimension(mm)	1180x1140x1250	1970x1670x1750	2300x1800x2200	2500x2000x2400
Weight (kg)	400	1300	2000	2500

 

Company Profile

 

Jiangxi Hengchang Mining Machinery Manufacturing Co., Ltd. is located in No.3 Chuangye Road. Guzhang In dustrial Park. Shicheng County. Ganzhou City. Jiangxi Province. China.Our company is engaged in the mineral processing equipment research, development, design and production for many years history, has accumulated rich experience in design and production. Enterprise in mineral processing equipment industry has had a positive effect, set up the good reputation. And mainly the manufacture of the products like as Shaking table. Flotation equipment. Crushing equipment. Magnetic separator. Screening equipment. Classifying equipment. Agitation tank, Feeding equipment. Gravity separation equipment. Wet separation equipment. Spiral chute. Saw-tooth wave jig and Diaphragm Jig. Grinding equipment. Ball mill. Slurry pump. Centrifugal pump, Conveying equipment.

We manufacture various types of mineral processing machinery and equipment according to our customers' requirements. Our products are widely used for sorting gold, silver, copper, iron, tungsten,lead. zinc. tin. molybdenum, nickel, tantalum, niobium, manganese ore, coal, monazite, rutile,diamonds, other precious metals and precious metals mine, and for the flotation colored, black metal,precious metals and other minerals. And we have export qualifications, our products sell well all over the world for several years, especially exported to Brazil. India. Indonesia.South Africa. Somalia, Philippines. Malaysia. Sudan, Nigeria. Iran, Russia, Ghana. Kazakhstan Kyrgyzstan.Cambodia,Vietnam,Korea,Mongolia and other countries.